NM-AD10PC
NMEA-0183 to Furuno AD-10 Converter  (User Guide)
 

Introduction, Operation, Input, Outputs, Connections Dip switces, LED Indicators, Specifications, Downloads

Order - Quotation request

Connections

---

The NMEA-0183 input sentence should be one of the $--HDT, $--HDG, $--HDM, $--VHW and $--RMC.
If a multiplexed input is applied containing more than one NMEA sentences, only the selected (by dip switches) sentence will be processed and converted to the Furuno AD-10 format.
 

 
Dip Switches

---

SW1-1	SW1-2	SW1-3	SW1-4	Functionality
OFF				AD10 and NMEA Output ports signal rate follows the input acquisition rate (default)
ON				AD10 and NMEA Output ports signal rate fixed at 5Hz
	OFF	OFF	OFF	Not used
	OFF	OFF	ON	Enables “$--HDT” to Furuno AD-10 conversion (default)
	OFF	ON	OFF	Enables “$--HDG” to Furuno AD-10 conversion
	OFF	ON	ON	Enables “$--HDM” to Furuno AD-10 conversion
	ON	OFF	OFF	Enables “$--VHW” to Furuno AD-10 conversion
	ON	OFF	ON	Enables “$--RMC” to Furuno AD-10 conversion
	ON	ON	OFF	Not used
	ON	ON	ON	Signal generator mode (Test mode)

B0, B1, B2 Indicator sequence

---

B2	B1	B0	Description
OFF	OFF	ON	“$--HDT” to Furuno AD-10 conversion
OFF	ON	OFF	“$--HDG” to Furuno AD-10 conversion
OFF	ON	ON	“$--HDM” to Furuno AD-10 conversion
ON	OFF	OFF	“$--VHW” to Furuno AD-10 conversion
ON	OFF	ON	“$--RMC” to Furuno AD-10 conversion
ON	ON	ON	Signal generator mode (Test mode)
All LED flashing			Dip switches SW1-2 to SW1-4 in a not used state (wrong settings

Tx, Rx Indicator sequence

---

Rx	Tx	Description
OFF		NMEA-0183 input signal is not available in the input port NMEA-0183 input signal is not correctly connected in the input port NMEA-0183 input signal not configured correctly
Flashing		NMEA-0183 input signal is available (Normal operation)
	OFF	AD10 and NMEA output ports do not transmit any signal
	Flashing	AD10 and NMEA output ports are transmitting (Normal Operation)

---

Back

Next