|
NM-251D-ZDA is a part of the NM-251 Series family and is programmed to function as a GPS signal filter/converter that produces the $GPZDA sentence from any GPS capable of transmitting the $GPRMC string
Certificates |
RMC to ZDA converter
|
|
Model: NM-251BRC
NMEA Baud Rate converter |
NM-251BRC is a baud rate converter that allows interconnection of talkers and listeners with different baud rates
NM-251BRC has five general purpose output ports that are able of transmitting NMEA sentences in both RS422 and TTL signal levels, depending on the connection topology and each one can fan out one instrument. |
Baud Rate Converter
|
|
Model: NM-AD10
NMEA to Furuno |
The NM-AD10PC is an NMEA-0183 to Furuno AD-10 protocol converter.
The NM-AD10PC can be used to interface any gyrocompass or heading sensor device capable of producing NMEA-0183 sentences with all the Furuno instruments that require AD-10 signals as input to acquire the heading information. |
NM-AD10 NMEA to Furuno AD10 protocol
|
|
Model: NM-422ETH
NMEA to Ethernet |
The NM-422ETH is a two channel NMEA-0183 input and four channels NMEA-0183 output multiplier. It enables data distribution from two NM-0183 sources (primary and secondary with priority encoding) to all NMEA-0183 instruments through four talker ports and direct PC connection through RS-232. In addition the Ethernet interface enables connection of the NM-422ETH in a local TCP/IP network topology.
|
NM-422ETH NMEA converter to TCP/IP - UDP
|