- Installation Photo Gallery - ScreenShots - Introduction, Access to configuration page, Configuring the communication ports (Serial & UDP)
- Setting up Sensors and Conditions - List of Values, presentation of values in the Navigation page - Configuring Relative Wind Sensor
- Configuring True Wind Sensor - Configure GAUGE1 as Rudder - Ratio & Offset - Heading Instrument
- Setting up Sensors and Conditions - List of Values, presentation of values in the Navigation page - Configuring Relative Wind Sensor
- Configuring True Wind Sensor - Configure GAUGE1 as Rudder - Ratio & Offset - Heading Instrument
$--HDG Heading, Deviation, and Variation Standard: IEC 61162-1, 2000 IMO Resolution A.382
$--HDG |
x.x |
x.x |
A |
x.x |
A |
*hh |
<CR><LF> |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
Identifier HDG |
Heading Value |
Deviation Value |
Hemisphere E W |
Variation Value |
Hemisphere E W |
Checksum |
Enter End of sentence |
Heading Magnetic |
|
Name= type a name Port_No= type the Port Identifier=HDG Ref= Ref_Location= Field_Type=Numeric Field_Location=2 Ratio=1 Offset=0 Status= Status_Location= Unit= Unit_Location= Assign=Value_07
|
|